China PET Blow Molding Machine manufacturers

Тема в разделе "inGame CS:GO MiniGame(МиниИгры)", создана пользователем ga520pa, 14 фев 2019.

Поделиться этой страницей

  1. ga520pa

    ga520pa

    Регистрация:
    14 фев 2019
    Сообщения:
    10
    Симпатии:
    0
    Automatic Bottle Blowing Machine Features:
    itemYCQ-2L-4E

    Bottle type specification
    cavity4
    theory output (PCS/HR)4000-5000
    Max. volume (L)2L
    Bottle mouth maximum overall diameter (mm)28-38mm
    Bottle biggest diameter100mm
    Bottle maximum height330mm

    Power specifications
    Light tube quantity32pcs
    Light tube power1.25kw
    Maximum heating power40kw
    All electric machine installation43kw
    Actual consumption21.5kw

    Air pressure specification
    Work pressure7-9kg/cm2
    Low-pressure gas consumption1600Ltr/min
    Blow bottle pressure25-35kg/cm2
    Higher -pressure gas consumption3000 Ltr/min

    Frozen water specification
    Work pressure5-6 kg/cm2
    Temperature range10
    Consumption8000kcal/hr
    Frozen water flow88Ltr/min
    Machine specificationSize of the machine4.5x1.6x1.9 (m)
    Weight of the machine3.5ton
    Standard Series Bottle Blowing Machine Features:
    1. This pet bottle machine is easy to operate by using full automatic human-machine interface. PET bottle blowing machine runs smoothly at very high speed.
    2. Every part of the whole machine is selected properly and treated precisely.
    3. PET bottle blowing machine adopts advanced intermittent perform loading system.
    4. Conveying performs automatically with the conveyor.
    5. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
    6. High adjustability to enable the preheater to preheat performs in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
    7. Action and blowing gas path design divided into three parts, in order to meet the needs of bottle blowing, the action of different pressure.
    8. No contamination and low noise.
    9. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
    10. Strong clamping force with high pressure and double crank links to lock the mold.
    11. Two ways of operating: automatic and manual.
    12. The safe, reliable, and unique design of the position of the valve to make the air pressure diagram of the machine easier to understand.
    13. Low cost, high efficiency, easy operation, easy maintenance, etc, with the automatic technological process.
    14. Contamination is avoided for the bottle body.
    15. Ideal effect of the chilling with the chilling system.
    16. Easy installation and starting; Low rejection rate: less than 0.2 percent.China PET Blow Molding Machine manufacturers
    website:http://www.blowmolding-machine.com/pet-blow-molding-machine/